Utility of Obstruction Light in Airport

 



Obstruction Light Intensity Levels

There are three levels of light intensity are utilized to mark aviation obstructions. These are low, medium and high. The objects which are not higher than 45 meters are marked by low-intensity lights. Medium-intensity lights are utilized to mark high buildings, constructions or natural things. 


地点: 美国

评论

发表评论

此博客中的热门博文

Things to know about Obstruction light

图片
       Aviation lights are usually ided into low intensity, medium intensity and high intensity. The vertical and horizontal distances of aviation lights are greater than 45 meters for buildings. The three types of obstruction marker lights that are used in conjunction with each other. Below 45 meters above the ground, low-intensity aviation obstruction lights is set up in relatively open surroundings, which are always bright red.   Use medium-intensity A aviation obstruction light above 105 meters above the ground and below 150 meters. Obstacles should mark the highest point and the extreme edge of the obstacle. The distance between the middle layer must be within 45 meters, and the height of the city should be within 100 meters. Special consideration must be given to adding aviation obstruction lights to the middle floors of buildings. The obstacle indicator light must be located 4-6 meters below the chimney mouth. Ultra-high objects higher than 150 mete...
阅读全文

What should you know about Airport wind sock?

图片
The windsock is a cost-effective but useful piece of kit which can indicate wind velocity and direction. Wind socks are often found on airport runways and provide pilots and airport staff with important information about wind directions and speeds. Wind socks can also be found in manufacturing plants where toxic materials or gases are used. The direction of the wind sock can tell staff which way the wind is blowing any chemicals. Windsocks may also be found on motorways or other public areas. When used on a boat, the product can be a useful aid in navigation. A windsock is sometimes known as a wind cone. Contemporary windsocks originate from Japan and China, and are usually manufactured using a high quality silk or paper. A windsock is a conical shaped textile tube, which resembles a giant sock. Hence it’s name: windsock. It’s designed to indicate wind direction and relative wind speed. It’s normally placed next to the runway or a helipad, so that pilots can easily see it afte...
阅读全文