Features and Benefits of Helipad Lights | Avia LED


Shenzhen Avia LED helipad lights are manufactured to challenging standards under strict quality control procedures. Our dedication to research as well as development, investing in contemporary equipment as well as advanced manufacturing processes has made us an industry leader in helipad lighting as well as solar aviation lighting. By choosing Avia LED you can rest assured you have chosen the very best company.

The helipad lights has been developed to allow night helicopter operations, limited to visual flight rules where a non-permanent lighting system is available to be used as a temporary or else permanent lighting system. It is a flexible system that can offer temporary, supplementary, emergency, as well as full operational airfield.
This helipad lighting system has been designed to fulfill the International Civil Aviation Organization required photometric as well as has been recently approved in compliance with the standard for Luminaries.

Features

 It is based on the obtainable permanent helipad equipment. But the basic equipment intend has been modified to allow a rapid, easy deployment on an existing helipad or else on an in the field landing strip or frozen lake.
Helipad lights
Helipad lights
The lights are connected through a parallel circuit, powered at twenty four Volts, and driven by a dedicated switchboard that manages the switching of any equipment. The switchboard is also interface able to an air-to ground radio control on board the aircraft.



Advantages of Helipad Lights

·       Speedy and easy operation on existing helipad or in-the-field landing strip or frozen lake
·       No need for skilled manpower
·       Reduced maintenance due to LED sources
·       Uniform brilliancy of light sources
·       High modularity to fit any operational needs
if you are looking out for high-quality LED Helipad lighting systems, consider buying from Shenzhen Avia LED.

评论

发表评论

此博客中的热门博文

What should you know about Airport wind sock?

图片
The windsock is a cost-effective but useful piece of kit which can indicate wind velocity and direction. Wind socks are often found on airport runways and provide pilots and airport staff with important information about wind directions and speeds. Wind socks can also be found in manufacturing plants where toxic materials or gases are used. The direction of the wind sock can tell staff which way the wind is blowing any chemicals. Windsocks may also be found on motorways or other public areas. When used on a boat, the product can be a useful aid in navigation. A windsock is sometimes known as a wind cone. Contemporary windsocks originate from Japan and China, and are usually manufactured using a high quality silk or paper. A windsock is a conical shaped textile tube, which resembles a giant sock. Hence it’s name: windsock. It’s designed to indicate wind direction and relative wind speed. It’s normally placed next to the runway or a helipad, so that pilots can easily see it afte
阅读全文

Utility of Obstruction Light in Airport

图片
  Obstruction Light Intensity Levels There are three levels of light intensity are utilized to mark aviation obstructions. These are low, medium and high. The objects which are not higher than 45 meters are marked by low-intensity lights. Medium-intensity lights are utilized to mark high buildings, constructions or natural things. 
阅读全文

Things to know about Obstruction light

图片
       Aviation lights are usually ided into low intensity, medium intensity and high intensity. The vertical and horizontal distances of aviation lights are greater than 45 meters for buildings. The three types of obstruction marker lights that are used in conjunction with each other. Below 45 meters above the ground, low-intensity aviation obstruction lights is set up in relatively open surroundings, which are always bright red.   Use medium-intensity A aviation obstruction light above 105 meters above the ground and below 150 meters. Obstacles should mark the highest point and the extreme edge of the obstacle. The distance between the middle layer must be within 45 meters, and the height of the city should be within 100 meters. Special consideration must be given to adding aviation obstruction lights to the middle floors of buildings. The obstacle indicator light must be located 4-6 meters below the chimney mouth. Ultra-high objects higher than 150 meters can be used in conjun
阅读全文