Here’s why you should go for helipad lights


Helipad lights are quite costly and the systems involved are quite complex.
In this article, we’ll look at the benefits of solar-power helipad lightning systems and will talk about the advantages of solar-powered lighting systems.
While talking of the helipad location, mainly there are two options: one is to use no lights and the other is to use AC lights with cable. Both have their advantages and drawbacks. The other alternative is AC lights cables which have been around for nearly a century and are quite well-known. However, these are quite time-taking and complex.
Coming to the other alternative; it is solar lights. In recent years, it is becoming more attractive with the industry moving slowly towards using incandescent lights to LED.

Easy to Install: Solar-powered helipad lights are easy to install and there are no trenching or specialized work crews needed. Moreover, it has minimal interruption to airfield operations. In case you have an existing helipad, then you can go out and put up ICAO and FAA compliant helipad lights without a specialized installation crew.

Simple to Operate: If the helipad lights are simple to operate, requires low maintenance, and rugged it means it has been installed throughout the world in a very strict environment.
helipad lights
Such lights have very simple control systems that are wireless. They are rugged and easy to use. Though many airports and helipads have complex electrical wiring systems, the solution to no high-voltage, no grounding systems, and no cabling is also a simple and effective lighting solution.

Low-Cost: Cost is the most important factor while choosing solar helipad lights as the cost of ownership is lower than the traditional system. Where per solar light unit costs more than an AC light, the cost to install and maintain a solar based system is quite less because it does not require any wiring, concrete, or drainage systems.
Solar-powered helipad lights are quite cost-effective and durable as compared to their counter-parts. For more information, make sure to visit our official website now!



地点: United States

评论

发表评论

此博客中的热门博文

What should you know about Airport wind sock?

图片
The windsock is a cost-effective but useful piece of kit which can indicate wind velocity and direction. Wind socks are often found on airport runways and provide pilots and airport staff with important information about wind directions and speeds. Wind socks can also be found in manufacturing plants where toxic materials or gases are used. The direction of the wind sock can tell staff which way the wind is blowing any chemicals. Windsocks may also be found on motorways or other public areas. When used on a boat, the product can be a useful aid in navigation. A windsock is sometimes known as a wind cone. Contemporary windsocks originate from Japan and China, and are usually manufactured using a high quality silk or paper. A windsock is a conical shaped textile tube, which resembles a giant sock. Hence it’s name: windsock. It’s designed to indicate wind direction and relative wind speed. It’s normally placed next to the runway or a helipad, so that pilots can easily see it afte
阅读全文

Utility of Obstruction Light in Airport

图片
  Obstruction Light Intensity Levels There are three levels of light intensity are utilized to mark aviation obstructions. These are low, medium and high. The objects which are not higher than 45 meters are marked by low-intensity lights. Medium-intensity lights are utilized to mark high buildings, constructions or natural things. 
阅读全文

Things to know about Obstruction light

图片
       Aviation lights are usually ided into low intensity, medium intensity and high intensity. The vertical and horizontal distances of aviation lights are greater than 45 meters for buildings. The three types of obstruction marker lights that are used in conjunction with each other. Below 45 meters above the ground, low-intensity aviation obstruction lights is set up in relatively open surroundings, which are always bright red.   Use medium-intensity A aviation obstruction light above 105 meters above the ground and below 150 meters. Obstacles should mark the highest point and the extreme edge of the obstacle. The distance between the middle layer must be within 45 meters, and the height of the city should be within 100 meters. Special consideration must be given to adding aviation obstruction lights to the middle floors of buildings. The obstacle indicator light must be located 4-6 meters below the chimney mouth. Ultra-high objects higher than 150 meters can be used in conjun
阅读全文